PG-S1
Waterborne polysiloxane (sol-gel)
- Film
- 5–15 μm
- Cure
- Thermal or ambient
- Best for
- New coils before shipment, OEM dip lines
Coil Coating for HVAC Projects in Southeast Asia
Typical sitesC3· MediumC4· HighC5· Very high
Local conditions
- Main exposure
- Year-round humidity, airborne salt, typhoons, industrial pollution
- Annual mean temperature, coastal cities
- 27.8–28.9 °C
- Annual mean relative humidity, coastal cities
- 73–82 %
- Typical category, coastal sites
- C4–C5 ISO 9223, estimated
Climate normals (mostly 1991–2020) from national meteorological services, NOAA and WMO for five major coastal cities in the region; ranges span those cities. Categories are indicative estimates for the site types shown.
Typical projects
- Coastal hotels and island resorts
- Factories in industrial parks
- Office towers, malls and hospitals
- Data centres
- Distributor stock for coastal regions
Recommended systems
PG-W
Waterborne two-component
- Film
- 5–10 g/m² per side
- Cure
- 80 °C touch-dry
- Best for
- Coil lines, mild coastal and humid sites
C3C4View system PG-W
PG-C
Air-dry two-component, chemical-resistant
- Film
- 20–40 μm
- Cure
- Ambient 72 h
- Best for
- Complete units, chemical and wastewater sites
C5CXView system PG-C
Shipping from South China
Loading portNansha / ShekouSouth China
Discharge portMain Southeast Asian container ports
Transit time depends on the destination and the schedule, and is confirmed with each quote.
Documents shipped with the goods
- Commercial invoice and packing list
- Bill of lading
- Certificate of origin (Form E where the ASEAN–China tariff preference applies)
- Batch QC report with film thickness record
- Coating warranty certificate
Humidity keeps corrosion going
Across the region coils stay wet for long periods, so corrosion that would pause in a dry climate runs all year. Coastal cities add airborne salt, and island sites are coastal almost everywhere.
Typhoons
Typhoons push salt spray and wind-driven rain much further inland than day-to-day sea breezes. After a storm, coils carry heavy salt deposits that stay wet in the humid air.
Industrial parks
Industrial parks near the coast combine pollution, salt and humidity. Factories there should be treated at the higher end of the range, moving to PG-C where acid gases are present.
Talk to us
Send the project list and destination port
We reply within 24 hours with a coating recommendation and quote.
Related
Can distributors order coated units for stock?
Yes. Coated stock for coastal regions can be ordered by model and quantity, with the batch report covering each shipment.
Does the typhoon season change the coating choice?
Storms carry salt spray further inland than normal onshore winds, so sites a few kilometres from the coast should be treated as coastal.
Are evaporators coated as well?
In humid coastal areas it is often worth it, especially for units that treat fresh outdoor air.
Request a quote
Tell us the equipment, the site and the destination port. We reply within 24 hours.