Skip to content
Pelagard

Coil Coating Materials Supply

Request a Quote Send your coil specifications
sealed coating drums on pallets in the materials store

Pack sizes and shelf life

System Pack sizes Shelf life Shipping
PG-S1 25 kg drums 12 months General cargo; protect from freezing
PG-S2 0.95 kg, 20 kg, 180 kg at least 6 months Per its SDS
PG-W 125 kg drums Stated with the quote Waterborne; protect from freezing
PG-C Stated with the quote 24 months Solvent-based; expected to ship as dangerous goods

Values are from the coating data sheets.

What comes with every supply

The English technical data sheet, the safety data sheet and an application guide covering surface preparation, mixing, film thickness and cure. Two-component systems include mixing ratios and pot life — PG-W must be used within 8 hours of mixing.

Process

See the full 14-step process
  1. coil drawings and specification sheets on the review desk
    01

    Specify

    Equipment, exposure, destination

  2. inspector checking a coated coil against the specification sheet
    02

    Sample

    First-article coating for new systems

  3. crushed fins on a coil face, recorded at incoming inspection
    03

    Inspect

    Incoming check with photo record

  4. coated coils lifted from the dip tank
    04

    Coat & cure

    Dip, spray or flood; cure logged

  5. dry film thickness gauge reading on a coated test panel
    05

    QC

    Film thickness, coverage, fin bridging, adhesion

  6. coated coils wrapped and padded on pallets
    06

    Report & ship

    Batch report travels with the goods

Coating options

Selected by site corrosivity. Salt-spray hours from different standards are not compared across systems.

Coating systems available for this service
SystemFilm thicknessCureBest for
PG-S1
Waterborne polysiloxane (sol-gel)
5–15 μmThermal or ambientNew coils before shipment, OEM dip lines
PG-S2
Polysiloxane-urethane clearcoat
5–10 μm160 °C / 60 minAluminium radiators, bakeable heat exchangers
PG-W
Waterborne two-component
5–10 g/m² per side80 °C touch-dryCoil lines, mild coastal and humid sites
PG-C
Air-dry two-component, chemical-resistant
20–40 μmAmbient 72 hComplete units, chemical and wastewater sites

Related

Also see

FAQ

Technically reviewed byPelagard Technical TeamCoating selection, application and quality controlLast reviewed:
Is there a minimum order?

Minimum quantities depend on the system and pack size and are confirmed with the quote.

Which system ships as general cargo?

PG-S1 is listed as general cargo on its data sheet and must be kept from freezing. PG-C is solvent-based and is expected to ship as dangerous goods.

Request a quote

Tell us the equipment, the site and the destination port. We reply within 24 hours.

Request a Quote Send your coil specifications
WhatsAppRequest a Quote