PG-S1
Waterborne polysiloxane (sol-gel)
- Film
- 5–15 μm
- Cure
- Thermal or ambient
- Best for
- New coils before shipment, OEM dip lines

Coated in China before shipment, or supplied as proven coating systems. Selected for your site’s corrosivity, applied on partner lines, documented batch by batch.
Units and coils sourced from China, coated before they are loaded.
Coils · outdoor units · chillersDip and spray capacity for coil and unit manufacturers.
Coil lines · batch runsDisassembly, masking, coating, reassembly and function check.
VRF · split · packaged unitsProven coil coating systems for applicators and OEM lines.
PG-S1 · PG-S2 · PG-W · PG-CWaterborne polysiloxane (sol-gel)
Polysiloxane-urethane clearcoat
Waterborne two-component
Air-dry two-component, chemical-resistant
Equipment, exposure, destination
First-article coating for new systems
Incoming check with photo record
Dip, spray or flood; cure logged
Film thickness, coverage, fin bridging, adhesion
Batch report travels with the goods
Coil within 500 m of the sea, no other exposure:
Waterborne polysiloxane (sol-gel)
Thin 5–15 μm film with ≥ 2,000 h neutral salt spray and ≤ 1.8% heat-transfer loss. Dip-applied before shipment.
| System | Test | Result | Standard |
|---|---|---|---|
| PG-S1 | Neutral salt spray | ≥ 2,000 h, no red rustPASS | GB/T 10125-2021 |
| PG-S1 | Heat-transfer efficiency loss | ≤ 1.8%PASS | GB/T 8446.2 |
| PG-S1 | Adhesion (cross-cut) | Grade 0PASS | GB/T 9286 |
Yes. Coils can be coated at the OEM’s line, or finished units can be partly disassembled, coated and reassembled at a partner facility before loading.
It depends on quantity, coating system and cure. We confirm the schedule with the quote.
A batch QC report with film thickness readings, coverage and fin-bridging checks, adhesion results and photos.
Yes. We apply your specified coating system to its data sheet and document every batch in the same report format.
Yes. PG systems are supplied to applicators and OEM lines with application guides and field repair kits.
Tell us the equipment, the site and the destination port. We reply within 24 hours.