PG-S1
Waterborne polysiloxane (sol-gel)
- Film
- 5–15 μm
- Cure
- Thermal or ambient
- Best for
- New coils before shipment, OEM dip lines
Coil Coating for HVAC Projects in the Middle East and Gulf
Typical sitesC4· HighC5· Very high
Local conditions
- Main exposure
- Heat, airborne salt, desert dust, humid nights on the coast
- Hottest-month mean daily maximum, coastal cities
- 38.3–46.6 °C
- Annual mean relative humidity, coastal cities
- 39–63 %
- Typical category, coastal and industrial sites
- C4–C5 ISO 9223, estimated
Climate normals (mostly 1991–2020) from national meteorological services, NOAA and WMO for five major Gulf and Red Sea coastal cities; ranges span those cities. Categories are indicative estimates for the site types shown.
Typical projects
- Hotels, resorts and mixed-use developments
- Residential and office towers
- District cooling plants and data centres
- Petrochemical and industrial facilities
Recommended systems
PG-C
Air-dry two-component, chemical-resistant
- Film
- 20–40 μm
- Cure
- Ambient 72 h
- Best for
- Complete units, chemical and wastewater sites
C5CXView system PG-C
Shipping from South China
Loading portNansha / ShekouSouth China
Discharge portMain Gulf and Red Sea container ports
Transit time depends on the destination and the schedule, and is confirmed with each quote.
Documents shipped with the goods
- Commercial invoice and packing list
- Bill of lading
- Certificate of origin
- Conformity certificates where the destination requires them
- Batch QC report with film thickness record
- Coating warranty certificate
Salt, dust and heat together
The Gulf is warm, shallow and very salty, and the Red Sea coast is hot and humid. Coastal cities sit close to both. Fine dust settles on the fins and carries salt with it, and humid nights turn those deposits into a wet, corrosive film. Salt flats near the coast add more chloride to the dust.
Industrial cities
Large petrochemical and industrial complexes line parts of both coasts. Units near them see acid gases on top of salt, which calls for a chemical-resistant film.
Project specifications
Consultants in the region usually write coil coating into the mechanical specification, often with a named salt spray standard and a list of approved coatings. Submit the coating for approval before the equipment ships.
Talk to us
Send the project list and destination port
We reply within 24 hours with a coating recommendation and quote.
Related
- EnvironmentsDesert Heat, Sand and Salt: Gulf Region HVAC
- ServicePre-Shipment Coil Coating in China
- GuidesWhat Coil Coating Do Gulf Region Projects Specify?
- EnvironmentsCoastal HVAC Corrosion by Distance from the Sea
- GuidesHow Much Lead Time Does Pre-Shipment Coating Add?
- EnvironmentsIndustrial Atmospheres (SO₂, NOx, Chlorides)
Can the equipment be coated after it arrives?
Yes, by a local applicator, but it adds a second handling step and site time. Coating before loading means the units arrive ready to install.
Do industrial sites need a different coating?
Where refineries, petrochemical plants or acid gases are nearby, yes — the chemical-resistant PG-C system instead of the thin film used for general coastal sites.
Request a quote
Tell us the equipment, the site and the destination port. We reply within 24 hours.