PG-S1
Waterborne polysiloxane (sol-gel)
- Film
- 5–15 μm
- Cure
- Thermal or ambient
- Best for
- New coils before shipment, OEM dip lines
Coil Coating for HVAC Projects in Central Asia
Typical sitesC2· LowC3· MediumC4· HighC5· Very high
Local conditions
- Main exposure
- Dry continental climate, dust, cold winters; industry and Caspian coast
- Coldest-month mean daily minimum, main cities
- −18.7 to −0.1 °C
- Hottest-month mean daily maximum, main cities
- 26.6–38.4 °C
- Typical category, industrial and coastal sites
- C4–C5 ISO 9223, estimated
Climate normals (mostly 1991–2020) from national meteorological services, NOAA and WMO for five major cities, including one on the Caspian coast; ranges span those cities. Categories are indicative estimates for the site types shown.
Typical projects
- Mining and metallurgy plants
- Oil and gas facilities
- Power and utility plants
- Commercial buildings and data centres
Recommended systems
PG-C
Air-dry two-component, chemical-resistant
- Film
- 20–40 μm
- Cure
- Ambient 72 h
- Best for
- Complete units, chemical and wastewater sites
C5CXView system PG-C
Overland delivery from China
OriginPartner coating linesSouth China
DestinationMain rail and road terminals in the region
Transit time depends on the destination and the schedule, and is confirmed with each quote.
Documents shipped with the goods
- Commercial invoice and packing list
- Rail or road consignment note
- Certificate of origin
- Conformity certificates where the destination requires them
- Batch QC report with film thickness record
- Coating warranty certificate
Where the corrosion risk is
Away from industry, the dry continental climate keeps coils dry for much of the year, and many sites fall in the lower categories. The picture changes near mining and metallurgy, where acid gases and dust attack coils, and on the Caspian coast, where oil and gas facilities add hydrocarbons and salt to humid air.
Dust and winters
Fine dust clogs fins and erodes films, so filtration and gentle cleaning matter as much as the coating. Hard winters mean cold starts for heat pumps and freeze risk for waterborne coating materials in transit.
Overland delivery
Equipment and coating materials reach the region overland by rail or road, so packing is specified for long land transport and temperature swings rather than sea freight.
Talk to us
Send the project list and destination port
We reply within 24 hours with a coating recommendation and quote.
Related
Do inland sites in a dry climate need coated coils?
Often not for general buildings far from industry. Coating pays off near mining, metallurgy, chemical and oil and gas sites, and on the Caspian coast.
What changes when coating materials ship in winter?
Waterborne coatings must be protected from freezing on overland routes. Ship in warmer months or use heated transport.
Request a quote
Tell us the equipment, the site and the destination port. We reply within 24 hours.